실습장비
한컴이노스트림소개 교육환경 실습장비
1인 1실습 NCS전용장비를 통한
실무 중심의 교육환경 구성
한컴이노스트림의 교육과정은 실제 업무에서 사용되는 타겟 보드와 디버거 등을 그대로 사용하여 교육받은 환경 그대로 현업에서 활용될 수 있도록 구성되어 있습니다. 수강생은 Fimware, WinCE, Linux, Android 등 개발에 필요한 다양한 환경에 대해 불편함 없이 실습 및 학습이 가능합니다.


개요
초고속 듀얼 코어 프로세인 ARM Cortex-A15의 강력한 3D 그래픽 기능을 이용해 최고의 모바일 앱을 개발 할 수 있습니다
Android 젤리빈을 이용해 빠르고 부드러운 성능과 쉬운 접근성으로 개발을 할 수 있습니다. ARNDALE 커뮤니티 보드는 오픈소스 코드를 통해 하드웨어와 소프트웨어를 쉽게 접근하여 time-to-market이 빨라집니다
Hardware Specification
-
CPU Board
- Samsugn Exynos 5250 Dual core
- Cortex-A15@1.7 GHz dual core subsystem with 64/128 bit SIMD NEON
- 32KB(instruction)/32KB(DATA)L1 Cache and 1MB l2 Cache
- 32-bit 800 MHz DDR3(L)/DDR3 2GB
-
Base Board
- ITU 601 camera Interface
- HDMI 1.4 interfaces with on-chip PHY
- One channel eDP output Single WQXGA
- MIPI DSI Standard Specification V1.01r11
- MIPI CSI Standard Specification V1.0 Two ports
- USB3.0 Host or Device 1-channel that supports SS(5Gbps) with on-chip PHY
- USB2.0 Host or Device 1-channel that supports LS/FS/HS with on-chip PHY
- USB HSIC 2-channel that supports 480Mbps with on-chip PHY
- SATA 1.0/2.0/3.0 interface
- One channel eMMC 4.5
- One channel SDIO 3.0
- Two channel SD 2.0
- Four channel high-speed UART
- (up to 3Mbps data rate for Bluetooth 2.0 EDR and IrDA 1.0SIR)
- Three channel high-speed SPI
- Three channel 24-bit I2S audio interface
- Four channel I2C interface support , up 400kbps
- Four channel HS-I2C up to 3.1Mps
- Support 10/100Mbps Ethernet One Port
- Support 6EA Configurable Button
- Support 4EA Configurable LED
- 1EA Power on Button
- Hold currents up to 2.3A
- INPUT POWER DC5V
-
Sound Board
- Sound Codec : AsahiKASEI AK4953
- Features 24-bit 96Khz 2-channel DAC and 2-channel ADC
- Digital De-emphasis Filter (tc=50/15μs, fs=32kHz, 44.1kHz, 48kHz)
- Digital ALC (Automatic Level Control)
- Digital Volume Control (+12dB ~ ?115dB, 0.5dB Step, Mute)
- Capacitor-less Stereo Headphone Amplifier
- HP-Amp Performance: S/(N+D): 80dB@24mW, S/N: 96dB
- Output Power: 24mW@16Ω
- Pop Noise Free at Power-ON/OFF
-
Connectivity Board
- MediaTek MT6620 4 in 1 combo
This is a 4-in-1 SiP Module which includes WLAN, Bluetooth, GPS and FM transmitter/receiver.
With four advanced radio technologies integrated into a SiP Module,
it provides the best and most convenient connectivity functions.
- WIFI
- 2.4Ghz, 5Ghz dual band
- Support IEEE 802.11 a/b/g/n
- WPS 2.0, WAPI (H/W)
- Wi-Fi Direct (WFA P-2-P standard)
SDIO 2.0 interface
- Bluetooth
- BT v2.1+EDR
- BT v3.0+HS(802.11AMP) compliance
- BT v4.0 Low Energy
- FM over Bluetooth
- High speed UART interface (4Mbps), PCM
- GPS
- GPS / A-GPS capability
- 165 dBm tracking sensitivity
- 160 dBm hot start sensitivity
- 148 dBm cold / warm start sensitivity
- UART interface
- FM
- 76-108MHz with 50KHz step
- RDS / RBDS support
- UART, audio, digital audio interface (I2S)
Board Specification
-
Block Diagram

-
Function Position

